Pembris Electrical installs a short command guide beside the add-in. It opens in your browser and works offline, so you can look a command up on site.

Open help for a command

  1. Point at a ribbon button

    Any button on the Pembris Electrical tab, Activate included, or an entry in the Settings menu.

  2. Press F1

    The guide opens at that command’s section.

F1
Open the guide at the command under the pointer

Open the whole guide

Choose Help in the Settings menu at the end of the tab, or under the gear on Home in the side pane.

What the guide covers

  • Routing: Route A→B, Connect devices and Drop to tray.
  • Devices: Place devices and Add to box.
  • Checking: Check routes, Check project, Re-route and Zones.
  • Quantities: Materials and the experimental Symbol legend.
  • The Settings menu: My settings, Project settings, What’s new, Help and Send feedback, and Activate.