Skip to main content
Devices panel

Place devices

Your devices one click away, landing in the box and at the height.

Every device you have placed with Pembris Electrical stays one click away in the side pane, from this project, your other projects and what colleagues share. Click one and it follows the cursor, landing in the empty box, at the height or in line with the devices already there.

Overview

  • Your library in the pane

    Pinned devices, In this project and From your other projects, with Find a device to search them.

  • Snaps where it belongs

    Into an empty box, to a height used nearby, or in line with and evenly spaced from the devices already there.

  • Linked walls and ceilings

    Face-based devices go on faces in loaded links, and the link is never changed.

Watch: Place devices

Pick a device from the pane and place it until Esc, snapping to boxes and heights.

What it supports

Each capability and its status today. Planned items are on the roadmap, not yet built.

  • Supported
  • Partial
  • Planned
  • Not supported

Placing

  • Place until Esc, or Place one

    Supported
  • Floor plans, ceiling plans, sections, elevations and orthographic 3D

    Other views say to open one of these.

    Supported
  • Keys while placing

    Shift lines up with the last, Ctrl + wheel makes a row, Space turns 90° and Alt places at the cursor.

    Supported
  • Box + face in one click

    Places the box, then the face into its front, as Add to box does.

    Supported
  • Height with a lock

    Locked, every wall click uses it. A typed height lasts until placing stops.

    Supported
  • Overhead in floor plans

    Looks straight up to the exposed ceiling, slab or roof underside and refuses if anything is in the way. Ceiling-, floor- and roof-hosted families refuse there.

    Partial
  • Height text afterwards

    Writes "+1100" beside each device, keeping clear of other notes, as one undo step.

    Supported

Families

  • Face-based, work-plane and unhosted families

    Unhosted MagiCAD families included.

    Supported
  • Wall-, ceiling-, floor- and roof-hosted families

    On that kind of element in this model only.

    Supported
  • Families from your other projects

    Loaded on first placement, in the same undo step.

    Supported
  • Revit’s Place Component instead

    Hand placing to Revit’s own tool from My settings › Devices.

    Supported
  • Line-based, two-level, adaptive or view families

    Their row opens a page that says why they can’t be placed.

    Not supported

Library and sharing

  • Product codes

    An EL number or your own code, saved in your list, the project’s or both.

    Supported
  • Share and import devices

    A .cvdevices file with devices, defaults, product numbers, family copies and pictures.

    Supported
  • Keep My devices in the project

    Your library stays on this PC, never in a project or MagiCAD’s folders.

    Not supported
  • Hand a placement to MagiCAD

    MagiCAD’s API takes no product or point to place.

    Not supported
  • Placing that feels instant

    Measuring and speeding up each step of placing is first on the roadmap.

    Planned
  • Revit 2025Supported

    Autodesk Revit 2025 on Windows.

  • Revit 2026Supported

    Autodesk Revit 2026 on Windows.

  • Linked modelsSupported

    Face-based devices on linked faces and unhosted ones beside them; wall-, ceiling-, floor- and roof-hosted families only in this model. The link never changes.

  • MagiCAD contentSupported

    Unhosted MagiCAD families place, save and share like any other family.

  • Conduit drawn by handSupported

    Places devices, not conduit; existing conduit is left alone.

Settings

Where to change how it behaves.

My settings › Devices › Place devices with
Pembris Electrical (snapping, rows and keys, the default) or Revit’s Place Component.
Devices page › a device’s page
Saved defaults for that device: Place as, Height above level and Row spacing.

Guides for Place devices

Open collection