Place devices, on the Devices panel, opens the Devices page of the Pembris Electrical side pane. It lists the devices you have placed before, in this project and your others. Click one and it follows the cursor, landing in the empty box, at the height or in line with the devices already there. There are no dialogs and no checks before you place.

Pick a device from the pane and place it until Esc, snapping to boxes and heights.
Families, their types and where each goes.

Place a device

  1. Open Devices

    Click Place devices, or Devices on the side pane’s Home.

  2. Find the device

    Type in Find a device, or use Up and Down. Pick takes a device in the model so you can place more like it.

  3. Click it and place

    Each click places one and keeps going. The pane shows a dark card with Stop, the Box + face, Box only and Face only switch, Height with its lock, and the spacing. Place one places once.

  4. Stop

    Press Esc or click Stop.

Enter
Place at the snapped spot (or click)
Shift
Line up with the last device
Ctrl+Wheel
Make a row at the row spacing
Alt
Place at the cursor, without snapping
Space
Turn 90°
F
Toggle the face of a device with a box
Tab
Next face under the cursor
1–6
Switch to a pinned device
H
Move what the last click placed up or down
U
In a floor plan, switch Place on Wall or Overhead
Esc
Stop placing

The list

  • Pinned: up to six devices, on keys 1 to 6.
  • In this project and From your other projects, each with its count. A family shows once, with its types as short rows under it.
  • A tag says where the family goes: Any surface, Wall only, Ceiling only, Floor only, Roof only, Free-standing, or an amber Can’t place. Box + face marks a box with its face.

Where Place devices works

  • Floor plans, ceiling plans, sections, elevations and orthographic 3D views

    Supported
  • Any other view

    Placing says to open one that works.

    Not supported
  • Face-based and work-plane-based families

    Supported
  • Unhosted families, MagiCAD devices included

    Supported
  • Wall-, ceiling-, floor- and roof-hosted families

    On that kind of host in this model only.

    Supported
  • Line-based, two-level, adaptive and view families

    Their row shows **Can’t place**, and their page says why.

    Not supported

Height text

When you stop with devices placed, the pane offers Height text for N devices? Click Add text to write the height above level, such as "+1100", beside each device in the default text type, as one undo step, or Not now. Notes keep clear of each other and of the devices; they are plain text and don’t follow a device that moves.