Skip to main content
Route panel

Connect devices

Choose the devices once and get the conduit between them as one network.

Select several devices (boxes, sockets, lights, a panel) and the conduit between them is planned as one network, as a chain or a tree. You review the whole layout, add it as one undo step and change it as a whole, not link by link.

Overview

  • Chain or tree

    Run each device to the next, or join them all by the shortest total length from a start device.

  • Add a whole circuit

    Add circuit… puts a circuit’s devices and its panel in the list in one go.

  • One review, one undo step

    The whole network is reviewed and added together, and one Undo removes it.

Watch: Connect devices

Choose devices and a start, and review the network as a chain or a tree.

What it supports

Each capability and its status today. Planned items are on the roadmap, not yet built.

  • Supported
  • Partial
  • Planned
  • Not supported

The device list

  • Pick, box select or start from a selection

    Two or more selected devices fill the list and skip the pick.

    Supported
  • Add circuit…

    The circuit’s members and panel join the list once.

    Supported
  • Add devices in view without a route

    Supported
  • Keep from the box

    After a box selection, one chip per device family turns that family’s devices off or on.

    Supported
  • Choose the start device

    Automatic suggests the first Electrical Equipment in the list.

    Supported
  • More than 50 devices

    The list says how many to remove before it can suggest a route.

    Not supported

Planning

  • Chain or tree

    A chain runs each device to the next; a tree takes the shortest total length.

    Supported
  • Common height

    Every horizontal run at one height, automatic or above a level you name.

    Supported
  • Devices already joined

    Two devices that already meet are noted once and no run is drawn between them.

    Supported
  • Partial networks

    When some links fail, it can offer the ones it could plan, with Cancel as the default.

    Partial
  • Links sharing an opening or overlapping

    Every link needs its own usable opening at each device.

    Not supported
  • Existing conduit or tray as devices

    Runs and fittings in the selection are left out and counted.

    Not supported

Next

  • A shared overhead trunk

    Real junctions and one drop per device, once junction fittings are checked in Revit.

    Planned
  • Chain or tree and conduit type per network

    Chosen in the device list.

    Planned
  • The missing links of a partial network

    Planned
  • Revit 2025Supported

    Autodesk Revit 2025 on Windows.

  • Revit 2026Supported

    Autodesk Revit 2026 on Windows.

  • Linked modelsPartial

    Elements in loaded links are kept clear of, but devices in a link can’t join the list.

  • MagiCAD contentPartial

    MagiCAD families work like any other Revit family; there is no MagiCAD-specific handling.

  • Conduit drawn by handPartial

    Existing conduit is kept clear of, but its runs can’t be picked into the device list.

Settings

Where to change how it behaves.

My settings › Routing
Topology: Chain, each device to the next (the default), or Tree. Clearance and direction are shared with Route A→B.
My settings › Routing › Default height
The height band runs prefer: Above the ceiling, Under the slab or Off.
My settings › General
Turns Connect devices on or off.

Guides for Connect devices

Open collection