Numbering… and Change number… work on every board, Pembris’s and Revit’s own. They store everything on the board the way Revit does: places before the start are Revit spaces and a reserve is a spare, so the panel schedule, tags and MagiCAD show the same numbers.

Numbering a board

Open Numbering… from a board’s More, from its Kept free or Reserve rows, or from the board’s heading in the circuit table. The window lists every place in order: kept free, circuits, reserves and where the next New circuit goes.

  1. Set Circuits start at

    The places before it are kept free. With circuits in the way, saving moves them all up together so the first lands at the start: the banner says how many and where to, and the button says Move N circuits. Cancel is the default.

  2. Add reserves

    Add reserve offers the next free place first. At a taken place it asks: after the last circuit (the default, no numbers change) or move what holds it and everything after it up one place. Pick a reserve to get Remove reserve.

  3. Click Save places

    All the changes go in one undo step. Cancel or Esc changes nothing.

Change number

Change number… is on every circuit’s page, and in the circuit table’s number cell. It gives one circuit another number on its board. A two-pole circuit keeps its shape.

  • A free number, or a reserve’s number, changes at once; the reserve goes.
  • A place kept free is refused, and so is a number past the board’s last place.
  • When another circuit has the number, the window names it and offers Swap or Replace. Cancel is the default.
ChoiceWhat happensWhen it’s allowed
SwapThe two circuits trade numbers, keeping their names and devices.Only circuits of the same size, and only with a free place on the board to move through.
Replace (red)The other circuit is removed, its devices left on no circuit.Only a circuit New circuit made, and never while a wire or tag of yours would go with it.