The route watch notices when an edit affects a route, such as a moved device or a duct pushed into a route. It warns you without taking the mouse or keyboard, and changes routes on its own only when you have chosen that.

The notice

A small window at the bottom right of Revit says how many routes need attention, the first finding and whether the model changed. While Check routes is open for the active project there is no notice: the same result is one line at the top of Check routes, with Apply or Review, More and ×.

ButtonWhat it does
ReviewOpens Check routes on those routes.
Re-route…Opens the normal review. Works in Warn me too.
AdoptMakes a pasted copy a route of its own.
ApplyShown when repairs wait for your click. Sends them through one review and one undo step.
Check viewChecks the active view after too many changes, or after a check that didn’t finish.
DismissQuiets the same findings for the session.
More ▴The other actions, Show in view among them.

Choose what it does

Set it in My settings › Checks, under When a change affects a route and Existing routes.

SettingChoicesDefault
What to doWarn me, Fix automatically or Don’t watchWarn me
Automatic fixesAsk before applying (the normal Re-route review) or Apply, then tell me (no review, one undo step per route)Ask before applying
Modify existing routesOff, Our routes only or All conduit, which includes conduit drawn by handOff
  • Fix automatically fixes warned findings after a change: a moved device, a detached or dragged end, a clash, a near miss, too many bends. It doesn’t fix problems found only because a view opened.
  • Modify existing routes also re-routes routes that break current rules (a clash, too close, too many bends) even if they didn’t change, at most 25 routes per view or change.
  • With All conduit, an unbranched run of conduit and two-way fittings drawn by hand, at most 200 elements and ending at devices, is replaced by a Pembris Electrical route.

What it never does

  • Write anything in Warn me. Only your click on Re-route, Adopt or Update run data writes, after checking again.
  • Repair after a zone change, or for a hard zone or unchecked zone finding.
  • Announce Not joined or Missing fitting: run Check project for those.
  • Move or change a device, or treat a check that didn’t finish as all clear.